GMCforum: GMCnet » Tools for turn signal switch replacement at GMCMI rally

Home » Public Forums » GMCnet » Tools for turn signal switch replacement at GMCMI rally

Show: Today's Messages :: Polls :: Message Navigator

Tools for turn signal switch replacement at GMCMI rally [message #307269]

Sat, 17 September 2016 08:14

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

Hi All
My turn signal switch does not latch for right turns, so I'm going to bring a replacement switch to the Mansfield Rally. Just wondering if anyone going there has a steering wheel puller and the spring compressor tools needed to do the job.

Thanks

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Tools for turn signal switch replacement at GMCMI rally By: RF_Burns on Sat, 17 September 2016 08:14
		Re: Tools for turn signal switch replacement at GMCMI rally By: Ken Burton on Sat, 17 September 2016 08:20
		Re: Tools for turn signal switch replacement at GMCMI rally By: RF_Burns on Sat, 17 September 2016 08:27
		Re: Tools for turn signal switch replacement at GMCMI rally By: Matt Colie on Sat, 17 September 2016 08:27
		Re: Tools for turn signal switch replacement at GMCMI rally By: Ken Burton on Sat, 17 September 2016 09:04

Previous Topic:	Trip report
Next Topic:	[GMCnet] headliner replacement help needed

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 17 16:15:31 CST 2024

Total time taken to generate the page: 0.00820 seconds