GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Body mounts (front and rear - the round ones)
Body mounts [message #306463] Sat, 03 September 2016 16:34
jimtze is currently offline  jimtze   Canada
Messages: 92
Registered: June 2011
Location: Victoria, BC
Karma:
Member
I am in the middle of replacing the body pads. Have the rectangular ones at the front and rear out and in. The middle ones still to go. My concern is that the forward bushing mounts seem to not line up with the hole in the body support. It looks to be too far to the rear by just enough to prevent the bolts from going through. Has anyone had problems with this and what was the solution?

I did note that you have to ensure the ground cable does not escape from the right front mount bracket.

Thanks


Jim Bratvold Victoria, BC 76 Eleganza ll
 
Read Message
Previous Topic: Fantastic warranty
Next Topic: [GMCnet] UPDATE - Oman troubleshooting and testing...
Goto Forum:
  


Current Time: Wed Nov 06 05:26:33 CST 2024

Total time taken to generate the page: 0.00906 seconds