GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » air intake hose
air intake hose [message #303173] Wed, 06 July 2016 15:48 Go to previous message
lqqkatjon is currently offline  lqqkatjon   United States
Messages: 2324
Registered: October 2010
Location: St. Cloud, MN
Karma:
Senior Member
one of the projects I have been not making a priority, is to replace my cold air intake hose. I had a 4" dryer vent, hooked between stock air cleaner, and a fiberglass Ram scoop (http://www.appliedgmc.com/prod.itml/icOid/574) in the grill.

that 4" dryer vent was a pain to take on and off to remove the air cleaner, and it was fragile, and just not a good thing. Then I replaced the original air compressor, and the new one ended up directly in the way of the hose routing i had, so I just tossed that hose in the garbage.

So I am trying to figure out best way to mount that ram air scoop, and run a hose to the air cleaner, and hopefully find a hose that when I want to pull the air cleaner off for any reason, It is easily done.


I am thinking of this guy:
https://www.amazon.com/Spectre-Performance-9751-Black-Duct/dp/B001OMM7HM/ref=sr_1_2?ie=UTF8&qid=1467837739&sr=8-2&keywords=automotive+inta ke+hose+4+inch


What have others done. I have heard someone say "corn picker hose" but have not come across where or what that is.


Jon Roche 75 palm beach EBL EFI, manny headers, Micro Level, rebuilt most of coach now. St. Cloud, MN http://lqqkatjon.blogspot.com/
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 3.21 final drive, any opinions
Next Topic: Air Intake Hose
Goto Forum:
  


Current Time: Thu Oct 10 04:23:01 CDT 2024

Total time taken to generate the page: 0.00813 seconds