GMCforum: GMCnet » [GMCnet] Restoration. Holes in floor. Filling in openings, or repair rotted floor plywood.

Home » Public Forums » GMCnet » [GMCnet] Restoration. Holes in floor. Filling in openings, or repair rotted floor plywood.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Restoration. Holes in floor. Filling in openings, or repair rotted floor plywood. [message #302248]

Fri, 17 June 2016 20:28

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

I had some openings in the floor that I needed to fill in. This hole was 3 inches in diameter. My GMC floor is 3/4 inch thick. I made a square patch out of 1/2 inch plywood. Then dubbed off the corners due to my router would make a round corner. Traced the patch shape out on the floor. Set the router for a depth of 1/2 inch to match the patch thickness. After making the cut. I applied some good wood glue. Then stood oh the patch to make a good contact. No screws needed. I also had two 3/4 holes side by side. I simply made one rectangle patch to cover both holes at once. I have photo's if interested.

Bob Dunahugh

78 Royale. Mouse House.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		[GMCnet] Restoration. Holes in floor. Filling in openings, or repair rotted floor plywood. By: BobDunahugh on Fri, 17 June 2016 20:28
		Re: [GMCnet] Restoration. Holes in floor. Filling in openings, or repair rotted floor plywood. By: rcjordan on Sat, 18 June 2016 09:00

Previous Topic:	screen door
Next Topic:	Buying a 1973 GMC Motorhome

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Jan 27 22:11:04 CST 2025

Total time taken to generate the page: 0.01317 seconds