GMCforum: GMCnet » Cadillac 500 Rocker Arm Stands

Home » Public Forums » GMCnet » Cadillac 500 Rocker Arm Stands (New Design Rocker Arm Stand for Cadillac 500 engines. )

Show: Today's Messages :: Polls :: Message Navigator

Cadillac 500 Rocker Arm Stands [message #298643]

Tue, 05 April 2016 00:15

djeffers

Messages: 219
Registered: June 2004

Karma:

Senior Member

Have these rocker arm stands been discussed on the GMCforum yet? They are on eBay for $44.99 per set.

http://www.ebay.com/itm/262362998710?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Wolverine WG6090-8 Shaft Rocker Arm Pivot for Cadillac 368/425/472/500 (8/pkg)

These design of these rocker arm stands does away with the stock Cad 500 rocker arm stand stress concentration point that sometimes leads to stand breakage, popping out a lifter and immediate loss of oil pressure.

The fit should be no problem. The only question is metallurgy; are they compatible with the stock 500 rocker arms in the long term?

We have a set coming and will install them for evaluation.

Don and Susan Jeffers
78 Eleganza II Cad 500

Report message to a moderator

[Message index]

		Cadillac 500 Rocker Arm Stands By: djeffers on Tue, 05 April 2016 00:15
		Re: [GMCnet] Cadillac 500 Rocker Arm Stands By: jimk on Tue, 05 April 2016 00:31
		Re: [GMCnet] Cadillac 500 Rocker Arm Stands By: Ken Henderson on Tue, 05 April 2016 06:33
		Re: Cadillac 500 Rocker Arm Stands By: Larry on Tue, 05 April 2016 07:16
		Re: [GMCnet] Cadillac 500 Rocker Arm Stands By: USAussie on Tue, 05 April 2016 18:38
		Re: [GMCnet] Cadillac 500 Rocker Arm Stands By: Larry on Tue, 05 April 2016 19:25
		Re: [GMCnet] Cadillac 500 Rocker Arm Stands By: Ken Henderson on Tue, 05 April 2016 19:31

Previous Topic:	Speedbleeders and bleeding brakes
Next Topic:	[GMCnet] jim k perfect record

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 29 17:36:50 CDT 2024

Total time taken to generate the page: 0.00480 seconds