GMCforum: GMCnet » Factory 455 Camsaft Specs

Home » Public Forums » GMCnet » Factory 455 Camsaft Specs

Show: Today's Messages :: Polls :: Message Navigator

Factory 455 Camsaft Specs [message #296336]

Sun, 28 February 2016 07:23

dr.diesel

Messages: 85
Registered: April 2015
Location: The Haute, Indiana

Karma:

Member

I thought for-sure I'd found this information before, but after extensive searching I'm still lost!

I'm searching for the factory 455 cam specs, I'm assuming all GMCs with the 455 had the same Cam.

Lobe Center Angle:
Intake Centerline:
Intake/Exhaust Duration:

If anyone has the same info for popular aftermarket grinds, ie Jim'sB cam that would be great also.

My goal is Dyno simulations etc.

Many thanks.

77 Kingsley

Report message to a moderator

[Message index]

		Factory 455 Camsaft Specs By: dr.diesel on Sun, 28 February 2016 07:23
		Re: Factory 455 Camsaft Specs By: KB on Sun, 28 February 2016 09:15
		Re: Factory 455 Camsaft Specs By: dr.diesel on Sun, 28 February 2016 13:13
		Re: [GMCnet] Factory 455 Camsaft Specs By: James Hupy on Sun, 28 February 2016 09:10
		Re: Factory 455 Camsaft Specs By: dr.diesel on Sun, 28 February 2016 16:25
		Re: Factory 455 Camsaft Specs By: Chris Tyler on Mon, 29 February 2016 11:05
		Re: [GMCnet] Factory 455 Camsaft Specs By: James Hupy on Mon, 29 February 2016 11:11
		Re: Factory 455 Camsaft Specs By: Chris Tyler on Mon, 29 February 2016 14:24
		Re: Factory 455 Camsaft Specs By: dr.diesel on Mon, 29 February 2016 16:42
		Re: Factory 455 Camsaft Specs By: Dennis S on Mon, 29 February 2016 18:42
		Re: [GMCnet] Factory 455 Camsaft Specs By: powwerjon on Mon, 29 February 2016 20:57
		Re: [GMCnet] Factory 455 Camsaft Specs By: dr.diesel on Fri, 04 March 2016 06:51
		Re: [GMCnet] Factory 455 Camsaft Specs By: dr.diesel on Fri, 04 March 2016 07:12
		Re: [GMCnet] Factory 455 Camshaft Specs By: Kosier on Mon, 29 February 2016 21:41
		Re: [GMCnet] Factory 455 Camshaft Specs By: jimk on Tue, 01 March 2016 00:39
		Re: [GMCnet] Factory 455 Camshaft Specs By: C Boyd on Tue, 01 March 2016 07:14

Previous Topic:	Half shaft alignment observations
Next Topic:	Custom Dash

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 09 03:31:50 CDT 2024

Total time taken to generate the page: 0.01380 seconds