[GMCnet] Furnace from hell returns [message #294342] |
Sun, 24 January 2016 20:52 |
glwgmc
Messages: 1014 Registered: June 2004
Karma:
|
Senior Member |
|
|
Lance,
When checking voltage be sure to use the furnace ground. The ground side of a dc circuit is just as important as the plus side. Often you will find good power in when you measure from a plus terminal to a good ground, but inadequate power when measured to a weak ground.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed & hand crafted
in the 1907 former Masonic Temple building
in historic Kerby, OR
http://jerrywork.com
"...................
Message: 3
Date: Fri, 22 Jan 2016 16:25:37 -0700
From: Lance
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Furnace from hell returns
Message-ID:
Content-Type: text/plain; charset="utf-8"
As I said, I checked the voltage at the furnace and all the connections. All good.
--
1974 Palm Beach
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|