GMCforum: GMCnet » Side Trim Replacement

Home » Public Forums » GMCnet » Side Trim Replacement

Show: Today's Messages :: Polls :: Message Navigator

Side Trim Replacement [message #289427]

Sun, 25 October 2015 21:34

GeorgeRud

Messages: 1380
Registered: February 2007
Location: Chicago, IL

Karma:

Senior Member

I'm finally getting ready to replace my side trim with some aluminum bar stock. Upon removing the old stainless trim, I notices some gray putty-like material under the stainless (looks similar to plumber's putty) that seemed original and was still soft and pliable. I'd like to clean and replace the material in the channel, but need any advice of what to use as I dislike leaks. I wonder if plumber's putty wouldn't work just fine.

The new trim should help with updated the looks, but I definitely want to use what would work the best to seal the body seam.

George Rudawsky
Chicago, IL
75 Palm Beach

Report message to a moderator

[Message index]

		Side Trim Replacement By: GeorgeRud on Sun, 25 October 2015 21:34
		Re: [GMCnet] Side Trim Replacement By: kelvin on Sun, 25 October 2015 21:59
		Re: [GMCnet] Side Trim Replacement By: powerjon on Mon, 26 October 2015 09:52
		Re: Side Trim Replacement By: GeorgeRud on Mon, 26 October 2015 15:59
		Re: Side Trim Replacement By: Harry on Mon, 26 October 2015 21:22
		Re: Side Trim Replacement By: GeorgeRud on Mon, 26 October 2015 21:48

Previous Topic:	Dinette Fold Down After Mkt Design
Next Topic:	50/50 Farm and Fleet antifreeze $4.99

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 10 11:27:20 CDT 2024

Total time taken to generate the page: 0.00713 seconds