GMCforum: GMCnet » 3-D printed part

Home » Public Forums » GMCnet » 3-D printed part (Any good candidates?)

Show: Today's Messages :: Polls :: Message Navigator

3-D printed part [message #288618]

Tue, 13 October 2015 08:02

Dan

Messages: 99
Registered: August 2014
Location: Allentown, NJ

Karma:

Member

Hello,

I believe this question has been asked before, but I could not narrow it down with a quick search. Later this week we will be getting a $10k 3-D printer here at work. It prints in proprietary ABS plastic and can make complex parts including moving bits. Are there any hard to find GMC parts that would be a good candidate for creating this way. I most likely would not be able to do a production run, but it might be interesting as a proof on concept. (who knows maybe I can talk my way into a larger run) The maximum build size is 5x5x5, but I'm thinking something much smaller. Any ideas would be appreciated.

Dan

Dan DeLuca 1978 Eleganza II (http://imgur.com/gallery/YFHhK) Parked at Evil Monkey Farm in Allentown, New Jersey

Report message to a moderator

[Message index]

		3-D printed part By: Dan on Tue, 13 October 2015 08:02
		Re: [GMCnet] 3-D printed part By: Olly Schmidt on Tue, 13 October 2015 08:43
		Re: [GMCnet] 3-D printed part By: Botts Chuck on Tue, 13 October 2015 16:02
		Re: 3-D printed part By: JohnL455 on Tue, 13 October 2015 08:50
		Re: 3-D printed part By: Dan on Tue, 13 October 2015 09:04
		Re: [GMCnet] 3-D printed part By: Olly Schmidt on Tue, 13 October 2015 11:00
		Re: 3-D printed part By: jknezek on Tue, 13 October 2015 10:39
		Re: [GMCnet] 3-D printed part By: Terry Taylor on Tue, 13 October 2015 11:30
		Re: 3-D printed part By: Dan on Tue, 13 October 2015 12:18
		Re: 3-D printed part By: jcurran on Wed, 14 October 2015 00:18
		Re: 3-D printed part By: Ken Burton on Wed, 14 October 2015 01:28
		Re: 3-D printed part By: petemosss on Wed, 14 October 2015 04:19
		Re: 3-D printed part By: Dan on Wed, 14 October 2015 06:45
		Re: 3-D printed part By: A Hamilto on Wed, 14 October 2015 11:17
		Re: 3-D printed part By: Dan on Wed, 14 October 2015 11:26
		Re: 3-D printed part By: A Hamilto on Wed, 14 October 2015 11:59
		Re: 3-D printed part By: pzerkel on Wed, 14 October 2015 12:53
		Re: [GMCnet] 3-D printed part By: emerystora on Wed, 14 October 2015 12:58
		Re: [GMCnet] 3-D printed part By: pzerkel on Thu, 15 October 2015 13:16
		Re: [GMCnet] 3-D printed part By: Guy Lopes on Thu, 15 October 2015 13:53
		Re: [GMCnet] 3-D printed part By: Bob de Kruyff on Thu, 15 October 2015 15:41
		Re: [GMCnet] 3-D printed part By: thesmith on Fri, 16 October 2015 07:36
		Re: [GMCnet] 3-D printed part By: A Hamilto on Thu, 15 October 2015 14:27
		Re: 3-D printed part By: Dan on Thu, 15 October 2015 18:05
		Re: 3-D printed part By: Chr$ on Fri, 16 October 2015 13:10
		Re: 3-D printed part By: thainglo on Sat, 17 October 2015 08:20
		Re: 3-D printed part By: Matt Colie on Sat, 17 October 2015 08:49
		Re: [GMCnet] 3-D printed part By: USAussie on Sat, 17 October 2015 16:36
		Re: [GMCnet] 3-D printed part By: Matt Colie on Sun, 18 October 2015 09:54
		Re: [GMCnet] 3-D printed part By: USAussie on Sun, 18 October 2015 18:10
		Re: 3-D printed part By: A Hamilto on Sun, 18 October 2015 15:46
		Re: 3-D printed part By: Matt Colie on Mon, 19 October 2015 07:51
		Re: 3-D printed part By: A Hamilto on Mon, 19 October 2015 11:42
		Re: 3-D printed part By: Dan on Sat, 17 October 2015 21:18
		Re: [GMCnet] 3-D printed part By: Olly Schmidt on Sun, 18 October 2015 12:29
		Re: [GMCnet] 3-D printed part By: A Hamilto on Sun, 18 October 2015 15:24
		Re: [GMCnet] 3-D printed part By: Billy Massey on Sun, 18 October 2015 15:34
		Re: [GMCnet] 3-D printed part By: Bob de Kruyff on Sun, 18 October 2015 22:06
		Re: [GMCnet] 3-D printed part By: Dan on Mon, 19 October 2015 07:01
		Re: [GMCnet] 3-D printed part By: Olly Schmidt on Mon, 19 October 2015 05:22
		Re: 3-D printed part By: Dan on Sun, 18 October 2015 15:43

Previous Topic:	[GMCnet] Spotted GMC
Next Topic:	OT Back to the Future II

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Oct 05 06:13:50 CDT 2024

Total time taken to generate the page: 0.00889 seconds