GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Repair Carrier Low Profile w/heatpump? (Need help on identifying a capacitor)
Repair Carrier Low Profile w/heatpump? [message #286053] Fri, 28 August 2015 15:55 Go to previous message
John  Sharpe is currently offline  John Sharpe   United States
Messages: 71
Registered: February 2006
Location: Porter, TX
Karma:
Member
The dual capacitor for the condenser fan and compressor needs to be replaced. The specs on the capacitor from EUN SUNG IND shows 45/12 uF 370 VAC. The specs on my non-heatpump unit is from GE and shows 12/50 uF 330VAC. The part number in the Carrier manual identify the condenser for both units as a 10-50061-00.

Am I correct to believe that the 12 uF is for the fan and the 45 and 50 are for the compressor? I have not been able to locate direct replacements for either of these. I know just enough about this stuff to be dangerous.

So I have a few questions: Can I use either a 370V or 440V capacitor for replacement? From what I have read this substitution is OK. Now the second part. Can 2 capacitors be used? Like one for the fan of say a 12.5 uF 440V and 45 uF 440V or 50 uF 440V for the compressor? ie is it ok to go up a little in the MFD?


John Sharpe
Porter, TX
78 Eleganza II, TBI
40 Ford Panel, TPI
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: onan heads
Next Topic: Another Fuel Line/Selector Valve Question
Goto Forum:
  


Current Time: Sat Sep 28 09:19:12 CDT 2024

Total time taken to generate the page: 0.00713 seconds