GMCforum: GMCnet » [GMCnet] Anyone had problems with the rocker arm pivots?

Home » Public Forums » GMCnet » [GMCnet] Anyone had problems with the rocker arm pivots?

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Anyone had problems with the rocker arm pivots? [message #284448]

Sun, 09 August 2015 23:14

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

Today I assembled the 455 that's going into Glenn, and BJ's old GMC. And I found 3 of the steel rocker arm pivots bent. This condition caused the push rods to be damaged because the push rods were in contact with the cast iron heads. So I installed the stock aluminum ones from the downer 455. I just don't see how the pivot's got bent. Any ideas?Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		[GMCnet] Anyone had problems with the rocker arm pivots? By: BobDunahugh on Sun, 09 August 2015 23:14
		Re: [GMCnet] Anyone had problems with the rocker arm pivots? By: Bullitthead on Sun, 09 August 2015 23:49

Previous Topic:	[GMCnet] Stick has a running Onan?
Next Topic:	explorer GMC 2

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 19:18:30 CST 2024

Total time taken to generate the page: 0.00843 seconds