GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Onan's revenge (Burned some stuff up...Why?)
Onan's revenge [message #281792] Fri, 10 July 2015 00:46 Go to previous message
Bullitthead is currently offline  Bullitthead   United States
Messages: 1411
Registered: November 2013
Karma:
Senior Member
Ran just fine all day powering the A/C. Shut it down when I got home, a week later crank but no start and the board and 2 diodes are burned. The K1 relay is also not connecting power to the "I" terminal, which is necessary to turn on the K3 relay.
http://www.gmcmhphotos.com/photos/onan/p58386-onan.html

I'll fix this with a wire, but I would like to know the root cause of all the damage.
http://www.gmcmhphotos.com/photos/onan/p58389-onan.html


This diode (CR1) is what power must flow through from K1 to energize K3 to turn on the ignition and fuel pump. If I remove the relay cover and push the relay to make contact, Onan will start and keep the relay pulled in by itself, just like it is supposed to do normally.
http://www.gmcmhphotos.com/photos/onan/p58392-onan.html

Notice the other burned diode---CR7
http://www.gmcmhphotos.com/photos/onan/p58395-onan.html

Anybody recognize whether this is the original board or not? Looks just like the one in the manual. I plan to repair it.
http://www.gmcmhphotos.com/photos/onan/p58398-onan.html

It worked when I parked it... Laughing


Terry Kelpien ASE Master Technician 73 Glacier 260 Smithfield, Va.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Onan issue
Next Topic: [GMCnet] Onan Starter / Norcold Fridge Issues
Goto Forum:
  


Current Time: Sat Nov 16 12:13:51 CST 2024

Total time taken to generate the page: 0.00565 seconds