| Glove Box Latch/Lock Assembly [message #279883] |
Sun, 14 June 2015 14:03  |
larry.whisler
Messages: 356
Registered: August 2005
Karma:
|
Senior Member |
|
|
Hello GMC Netters,
I have had a problem with the Latch/Lock on the coach's glove box
door. The assembly was very loose and would not latch tightly.
So, I put the key in the lock and with a bit of fiddling around
with it, I was able to take it apart.
Looking at the parts manual, I found that the assembly consist of
the three components that I have after taking it apart:
5) Cylinder Assembly which is the knob
6} Escutcheon
7) Case Assembly which is the lock assembly
Installed the Case Assembly using the Escutcheon in the glove box
door with the notch in the Case Assembly in the correct position
in the door which also aligns the lock mechanism up the inside of
the glove box latch.
What is the procedure for installing the cylinder assembly into the
installed case assembly?
thanks in advance for any advice
larry ( not a locksmith ) whisler
76 glenbrook
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
