GMCforum: GMCnet » Pork chop adjusting nut

Home » Public Forums » GMCnet » Pork chop adjusting nut

Show: Today's Messages :: Polls :: Message Navigator

Pork chop adjusting nut [message #279639]

Thu, 11 June 2015 14:31

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma:

Senior Member

While adjusting my torsion bars yesterday I noticed one of the adjusting nuts was bent. There really doesn't look to be a way to re-enforce them. I had a couple of torsion adjusting nuts and bolts from the parts truck (1993 Chevy 2500) and installed one of them. The nut is slightly narrower than the original and metric thread but it seems to fit. Anyone ever try this?
Hal

"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane." 1977 Royale 101348, 1977 Royale 101586, Diesel powered, 1974 Eagle Bus 45',w/slideout, Rio Rancho, NM

Report message to a moderator

[Message index]

		Pork chop adjusting nut By: Hal StClair on Thu, 11 June 2015 14:31
		Re: Pork chop adjusting nut By: George Beckman on Thu, 11 June 2015 22:14
		Re: [GMCnet] Pork chop adjusting nut By: James Hupy on Fri, 12 June 2015 08:37
		Re: [GMCnet] Pork chop adjusting nut By: Hal StClair on Fri, 12 June 2015 14:17

Previous Topic:	Re: [GMCnet] Motorhome Snob
Next Topic:	[GMCnet] Nearly new Iota 75 amp converter/charger anyone?

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 01 12:41:24 CDT 2024

Total time taken to generate the page: 0.01800 seconds