GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Steering Gear Adjustment
Steering Gear Adjustment [message #279225] Sat, 06 June 2015 17:33 Go to previous message
bhayes is currently offline  bhayes   United States
Messages: 263
Registered: March 2010
Karma:
Senior Member
I've read Rob Mueller's excellent steering inspection guide to determine how to get rid of some recently acquired steering slop, and I've noticed that I have a lot of movement on the steering box input shaft, but very little relative movement on the pitman arm. I've watched some YouTube videos on adjusting (tightening) Saginaw steering gears, and was wondering if adjusting the screw on the front of the box (held in place by a locknut) is the correct way to tighten this up.

Bryan Hayes
'76 Eleganza II
Salt Lake City, Utah
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Piston rod stretch in the 455
Next Topic: OEM radiator end tanks
Goto Forum:
  


Current Time: Fri Oct 04 02:36:46 CDT 2024

Total time taken to generate the page: 0.00617 seconds