GMCforum: GMCnet » P-30 master cylinder disassembled

Home » Public Forums » GMCnet » P-30 master cylinder disassembled

Show: Today's Messages :: Polls :: Message Navigator

P-30 master cylinder disassembled [message #279216]

Sat, 06 June 2015 14:53

wally

Messages: 643
Registered: August 2004
Location: Omaha Nebraska

Karma:

Senior Member

After battling a P30 master cylinder bench bleed I took one apart to see what's in there. This one does indeed have O rings as seals along with Teflon rings. The end opposite the pedal was the booger, seemingly bubbles forever. That telescoping piston has a bunch of holes and places to trap air. how level it while bleeding may make a difference.
pics http://www.gmcmhphotos.com/photos/g6798-p-30-master-cylinder-disassembled.html

Wally Anderson
Omaha NE
75 Glenbrook

Report message to a moderator

[Message index]

		P-30 master cylinder disassembled By: wally on Sat, 06 June 2015 14:53
		Re: [GMCnet] P-30 master cylinder disassembled By: emerystora on Sat, 06 June 2015 15:48
		Re: [GMCnet] P-30 master cylinder disassembled By: USAussie on Sat, 06 June 2015 20:23

Previous Topic:	Oil filter housing to block gasket # ?
Next Topic:	[GMCnet] FW: Still dealing with Brakes

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 05:44:31 CST 2024

Total time taken to generate the page: 0.00778 seconds