GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] FW: Still dealing with Brakes
[GMCnet] FW: Still dealing with Brakes [message #278685] Fri, 29 May 2015 22:22 Go to previous message
Neil Fonville is currently offline  Neil Fonville   
Messages: 68
Registered: May 2014
Karma:
Member
About to the point of just selling out and be done. Spent 15 hours installing 4 wheel disc brakes on the rear and about as much time getting the coaches brakes to actually work. Working is a pretty loose term here too. After getting the kit installed, I have really no braking. Spent ton of time bleeding with various methods. Then, I installed a new master cylinder 34 mm model from O'riley and a new all disc PV4 combiner valve. Spend the last 6 hours bleeding. Not much better. I bleed with a suction bleeder from Harbor Freight. Ran a quart of fluid through and no bubbles. Brakes are worse than when I started. I can't think there is air in the system at this point. Dumped $1800 in parts and lots of time. Frustrated that there is no qualified mechanics in the DFW area to help maintain my coach. The person referred by local GMCers lives in Athens 60 miles away. Not practical as he has a full time job and does not have time for big projects. The thrill is now gone an
d I'm about to fire sell a nice GMC II with no brakes. Any idea what needs to be the next step to get this thing back on the road? Where is the closest place to get someone qualified to get this coach fixed?

Frustrated GMC owner in DFW
Neil Fonville
Allen, TX
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



1975 GMC II Allen, TX
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: P-30 master cylinder disassembled
Next Topic: Upper radiator hose for the 403
Goto Forum:
  


Current Time: Sat Nov 16 03:45:41 CST 2024

Total time taken to generate the page: 1.34415 seconds