Does my 6Kw Onan have the wrong flywheel? [message #278312] |
Sun, 24 May 2015 17:36 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma:
|
Senior Member |
|
|
I decided to install the Pertronic ignition kit by Gary Bovee. The 6Kw shows it should have a 25degree advance and Gary's instructions show it should have a mark on the flywheel for that. I have a mark for TDC and one for 20 degrees, but no mark at 25. By eyeballing up the degree markings on the valve train cover, the 20 degree flywheel marking lines up with 20 degree mark.
Judging by the where the points open, mine is currently running about 17 BTDC.
The flywheel has PN 170-2997, but the manual says it should be 134-2603.
Have I got a different variation and should use 20BTDC or have I got a different flywheel and should set it for 25 BTDC?
The Onan is a NH-1R/9000H on a 1977 PB built in Oct 76.
What say yea?
thanks
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
[Updated on: Sun, 24 May 2015 17:46] Report message to a moderator
|
|
|