GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] Hello...exhaust manifold leak.
Re: [GMCnet] Hello...exhaust manifold leak. [message #276948] Tue, 28 April 2015 23:13 Go to previous message
BobDunahugh is currently offline  BobDunahugh   United States
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma:
Senior Member



Jim K's copper gaskets to me is wourth every copper penny they cost. Get the manifolds surfaced for a great seal. For me it's been the problem of getting the bolts out without breaking them off. I've tried all the tricks. And still always break at least one on each side. The exhaust pipe bolt have never been a problem. As I get the manifold red hot it the area of the bolts. I put lubed the bolts as I put them back in. I'm thinking of pulling the bolts out. And installing studs with nutes. Bob Dunahugh 78 Royale, and too many COPO Yenko's


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Looking for the replacement Panduit wire molding.
Next Topic: [GMCnet] Caddie Problem
Goto Forum:
  


Current Time: Tue Oct 01 08:42:30 CDT 2024

Total time taken to generate the page: 0.00619 seconds