| [GMCnet] Microwave recommendation [message #276855] |
Mon, 27 April 2015 18:26 |
glwgmc
Messages: 1014
Registered: June 2004
Karma:
|
Senior Member |
|
|
Depending on the me and the inverter the difference between name plate and actual draw can be quite significant
Search for my post re the Panasonic inverter me and a. Xantrax sw inverter that would not run even with 460ah of battery and large wires. Turns out the manuf finally conceded the mw would pull over 200 amps out of that inverter, more than it could handle. Seems the two would not play well together.
Jerry
Message: 1
Date: Mon, 27 Apr 2015 11:16:24 -0500
From: Bob Dunahugh
To: "gmclist@temp.gmcnet.org"
Subject: Re: [GMCnet] Microwave recomendation
Message-ID:
Content-Type: text/plain; charset="iso-8859-1"
Gerald is correct. But that applies to ALL microwaves. The WATT rating shown is the output of the unit. Not the watts required to run them. That input will always be higher. But not much. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
