Electric Fuel Tank Selector Valve [message #276850] |
Mon, 27 April 2015 17:46 |
djeffers
Messages: 219 Registered: June 2004
Karma:
|
Senior Member |
|
|
Hello,
We are looking for an electric Fuel Tank Selector Valve.
Thought the Pollak 42-159 would work, but found it is 6 1/4 inches from top to bottom and it is rotated about 30 degrees from its integral mount so that the inlet and outlet ports are not parallel to the mounting surface, maybe creating some fuel line routing problems. .
Thought we had seen on the Forum that some were using the Pollak tank selector valve. If so,
where are you mounting this rather large valve and in what orientation?.
We need to accommodate the higher pressure of our 45 psi fuel injection system so the regular
GMC electric fuel tank selector valve and its low pressure rating probably won't work for us.
Thanks for any suggestions,
Don and Susan Jeffers
78 Eleganza II
|
|
|