[GMCnet] $99 Macerators [message #274497] |
Sat, 28 March 2015 11:05 |
glwgmc
Messages: 1014 Registered: June 2004
Karma:
|
Senior Member |
|
|
Hi Rob,
"There is no way that Mexico or Mexicans will ever achieve the design, engineering, and manufacturing level of Japan. "
Isn't that about the same thing the English said about the colonies at one point........?
I have opened up a number of different brand macerators over the years and they all seem to have interchangeable parts inside. They all fail because of a crappy seal around the shaft that allows water to leak onto the mounting studs and into the motor. Those studs will eventually break and/or the motor will freeze up. The rubber impeller will eventually fail if you run them dry too long.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
glwork@mac.com
http://jerrywork.com
==============
Message: 3
Date: Fri, 27 Mar 2015 19:17:51 -0500
From: "Rob Mueller"
To:
Subject: Re: [GMCnet] $99 Macerators
Message-ID:
Content-Type: text/plain; charset="us-ascii"
No way!
I'm trying to figger out how to say what I want to say without insulting Mexico and Mexicans and making a generalization but here
goes. If I do I apologize in advance.
There is no way that Mexico or Mexicans will ever achieve the design, engineering, and manufacturing level of Japan. The Japanese
are world leaders when it comes to that. They were helped to achieve that status by an American by the name of Dr. D.W. Deming.
http://en.wikipedia.org/wiki/W._Edwards_Deming
Regards,
Rob M.
=============
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|