GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Experience w/ CHUCK AULGUR bearing grease tool
Experience w/ CHUCK AULGUR bearing grease tool [message #268453] Sun, 28 December 2014 16:28 Go to previous message
dservati1 is currently offline  dservati1   United States
Messages: 109
Registered: December 2013
Location: Western New York -Rochest...
Karma:
Senior Member
Hey There GMC'ers anyone here have any knowledge about this tool? It claims to be able to get grease to the front bearings without disassembling the hub. If it works I am VERY interested... and yes I know dis-assembly and packing would be the best ... but ...

http://www.appliedgmc.com/prod.itml/icOid/885
http://www.appliedgmc.com/prod.itml/icOid/885

'78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada on ION wheels,Green Brady Bunch stock David Martin on Facebook

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Facebook
Next Topic: Found the title location of my family's 1975 GMC.... need assistance
Goto Forum:
  


Current Time: Tue Jul 02 20:04:24 CDT 2024

Total time taken to generate the page: 0.00720 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software