GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » HVAC air flow questions 77 model (No heat from floor vents)
HVAC air flow questions 77 model [message #267225] Sat, 06 December 2014 07:25 Go to previous message
kerry pinkerton is currently offline  kerry pinkerton   United States
Messages: 2565
Registered: July 2012
Location: Harvest, Al
Karma:
Senior Member
I've spent a couple hours this morning searching and reading about HVAC systems and haven't found the answer to my question...actually two questions.

I have a late 77 with one of the less sucky HVAC units. I have good (by GMC standards) air flow from the AC vents but no detectable air flow on the floor when in heat mode. All the air comes out the AC vents and your feet freeze. We're planning on going to the Lazy Days rally in Tampa next month and I would like to get some heat on the floor.

First question: Is this just the nature of the beast or is there an air door or valve that is not working? If so, any ideas on how to reach it or where it is? Thoughts, advice, and opinions welcome.

Second question: Under the hood center is a plastic flap and under that is what appears to be a fresh air intake. I have not yet investigated if the air door in it is working or not. We rarely use anything but max air and in the very unlikely event it gets too cold, just adjust via adding some heat. Is there anything to be gained/lost by sealing this area up?

I'm not yet ready to gut my dash so if there is anything I can do to improve things, I'm open.



Kerry Pinkerton - North Alabama Had 5 over the years. Currently have a '06 Fleetwood Discovery 39L
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Sighting in Edmonds WA
Next Topic: [GMCnet] New production OEM brake master cylinders problem
Goto Forum:
  


Current Time: Tue Oct 01 09:35:27 CDT 2024

Total time taken to generate the page: 0.01451 seconds