CV Boot Repair [message #265470] |
Tue, 04 November 2014 22:47 |
The Dr
Messages: 75 Registered: July 2014 Location: Toledo, OR
Karma:
|
Member |
|
|
OK. First time I took the half shafts out of the coach. It is a 1 ton conversion. The information on the forum and elsewhere was invaluable.
Now I have the first one apart and have the parts cleaned out but not with mineral spirits. The bearings look alright as does the inner race and cage. The outer race has two gouges that I have been able to see and I am wondering if it means the outer race needs to be replaced.
I think I captured both of them in this picture:
I know doing this by pictures is hard, but I am hoping someone with more experience than this computer programmer will be able to tell me. If not, when in doubt replace it.
Thanks
Mike Sauer
Toledo, OR
1975 26' Avion
1-ton front end, SullyBilt AirBag System, 3.21 tranny
|
|
|