[GMCnet] Magnet CB antenna Wilson 1000, best solutions... [message #263039] |
Mon, 29 September 2014 22:00  |
gmc gmc
 Messages: 69 Registered: May 2009
Karma:
|
Member |
|
|
Hello All, Mike here from Madison, WI. with my '78 :)
Planning to drive to FL In November. I have a good Wilson 1000 magnet mount
antenna. Thinking to put it on roof. One solution was to attach a metal
plat to roof with screws or I was thinking a good 2 part epoxy. I could
paint the metal, or a coating to prevent rust. Thinking 1/4" thickness?
2. I do have the first panel headliner coming off, so I could remove that (
another fix somehow - or change all RV headliner to something better, it is
a fabric on a thin board like material I can go look closer. ) then i
think there is foam up there? could remove foam, then gat like a 1/2" or
1/4" metal plate and attach it to the roof, and buddy says magnet will grab
hold through the roof and that is an elegant solution?
appreciate all advices.
Mike
CB I will probably make a little box for temporary mount. I like to keep it
free as antenna is as I might desire wot my it to my car or SUV for smaller
road trips.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|