GMCforum: GMCnet » AC won't hold vacuum

Home » Public Forums » GMCnet » AC won't hold vacuum

Show: Today's Messages :: Polls :: Message Navigator

AC won't hold vacuum [message #261849]

Sun, 14 September 2014 12:43

Keith V

Messages: 2337
Registered: March 2008
Location: Mounds View,MN

Karma:

Senior Member

So I replaced the high pressure hose from the compressor to the condenser and the accumulator after the hose hit the pulley.

now when I pull a vacuum it pulls down fine but it wont hold. after about 4 hours its lost some vacuum.
the place that redid the hose welded on some new connectors does anyone think the hose could be bad?

Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com

Report message to a moderator

[Message index]

		AC won't hold vacuum By: Keith V on Sun, 14 September 2014 12:43
		Re: AC won't hold vacuum By: roy1 on Sun, 14 September 2014 14:10
		Re: [GMCnet] AC won't hold vacuum By: emerystora on Sun, 14 September 2014 16:54
		Re: [GMCnet] AC won't hold vacuum By: Keith V on Sun, 14 September 2014 17:55
		Re: [GMCnet] AC won't hold vacuum By: Bullitthead on Sun, 14 September 2014 19:50
		Re: [GMCnet] AC won't hold vacuum By: Keith V on Sun, 14 September 2014 20:42
		Re: [GMCnet] AC won't hold vacuum By: Keith V on Sun, 14 September 2014 20:48
		Re: [GMCnet] AC won't hold vacuum By: Bullitthead on Sun, 14 September 2014 22:09
		Re: [GMCnet] AC won't hold vacuum By: Keith V on Fri, 19 September 2014 09:02
		Re: [GMCnet] AC won't hold vacuum By: roy1 on Fri, 19 September 2014 10:55
		Re: [GMCnet] AC won't hold vacuum By: roy1 on Fri, 19 September 2014 11:09
		Re: [GMCnet] AC won't hold vacuum By: Keith V on Fri, 19 September 2014 12:38

Previous Topic:	[GMCnet] Options for exterior paint freshening
Next Topic:	Steering shaft boots

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Feb 01 06:48:10 CST 2025

Total time taken to generate the page: 0.01388 seconds