| Vapor cannister surprise! [message #258877] |
Fri, 15 August 2014 07:33  |
thorndike
Messages: 406
Registered: January 2011
Location: Conifer, Colorado
Karma:
|
Senior Member |
|
|
A week or two ago I posted a picture of my vapor cannister. I knew it had to be replaced because there was a hole in the top where the vapor line connection to the carb used to be. So yesterday I crawled under the coach and attempted to loosen the clamp holding the cannister in. Unfortunately, it was so rusted and I was in an uncomfortable position that I was not making any headway. So I decided to remove the wheel well liner to allow me to access things from above. Imagine my surprise when I saw this:
 http://i.imgur.com/UIQ4Dnb.jpg
Yep, unless I am mistaken, that is another vapor cannister ready to go. It was dusty, but appears to never have had hoses connected to it. I am wondering if a PO had it installed, but the installer forgot to run the hoses.
Looks like I can return the one I bought from JimK!
Bob
Robert Peesel
1976 Royale 26'
Side Dry Bath
Conifer, Colorado
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
