GMCforum: GMCnet » [GMCnet] Gas line 3/8 or 5/16

Home » Public Forums » GMCnet » [GMCnet] Gas line 3/8 or 5/16

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Gas line 3/8 or 5/16 [message #258833]

Thu, 14 August 2014 19:13

Kingsley Coach

Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada

Karma:

Senior Member

Netters

It is my belief that the original gas lines on my '77 Kingsley with 403
engine were 3/8 .
What would happen if I dropped down to 5/16 since I have lots of that
tubing? Would the slight reduction affect gas flow in the real world?
Just wondering?

Thanks

Mike in NS

--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS

I am not an alcoholic; alcoholics go to meetings.
I am a drunk; I go to parties !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Gas line 3/8 or 5/16 By: Kingsley Coach on Thu, 14 August 2014 19:13
		Re: [GMCnet] Gas line 3/8 or 5/16 By: lotsofspareparts on Thu, 14 August 2014 19:48
		Re: [GMCnet] Gas line 3/8 or 5/16 By: lotsofspareparts on Thu, 14 August 2014 19:50
		Re: [GMCnet] Gas line 3/8 or 5/16 By: jimk on Thu, 14 August 2014 19:57
		Re: [GMCnet] Gas line 3/8 or 5/16 By: Matt Colie on Fri, 15 August 2014 07:35
		Re: [GMCnet] Gas line 3/8 or 5/16 By: James Hupy on Fri, 15 August 2014 09:35
		Re: [GMCnet] Gas line 3/8 or 5/16 By: bdub on Fri, 15 August 2014 10:22
		Re: [GMCnet] Gas line 3/8 or 5/16 By: James Hupy on Fri, 15 August 2014 10:30
		Re: [GMCnet] Gas line 3/8 or 5/16 By: k2gkk on Fri, 15 August 2014 10:44
		Re: [GMCnet] Gas line 3/8 or 5/16 By: James Hupy on Fri, 15 August 2014 10:57
		Re: [GMCnet] Gas line 3/8 or 5/16 By: Kingsley Coach on Fri, 15 August 2014 18:27
		Re: [GMCnet] Gas line 3/8 or 5/16 By: USAussie on Fri, 15 August 2014 20:08
		Re: [GMCnet] Gas line 3/8 or 5/16 By: USAussie on Fri, 15 August 2014 07:35
		Re: [GMCnet] Gas line 3/8 or 5/16 By: roy1 on Fri, 15 August 2014 11:18

Previous Topic:	Installing shocks
Next Topic:	Why does my BriskAire II drip on the floor??

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 19:22:50 CST 2024

Total time taken to generate the page: 0.01037 seconds