GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » All clean and nearly ready to go!
All clean and nearly ready to go! [message #258417] Sun, 10 August 2014 19:14 Go to previous message
thorndike is currently offline  thorndike   United States
Messages: 406
Registered: January 2011
Location: Conifer, Colorado
Karma:
Senior Member
Thanks to all the help I have received over the last few years, we are just about ready to roll.

I washed the coach today in preparation for sealing every seam crack I can find. I wanted to get all the dirt, pine needles, etc out of the cracks so the crack filler has a better chance. We are going to try a combination of fillers to see how well they work. I have a tube of 3m Drip Chek and a tube of Capt. Tolley's crack filler (http://www.captaintolley.com/ ) I had not heard of Capt. Tolley but it came highly recommended from another GMCer. I will let everyone know what I think when I am done.

I still have a few things to finish, but I expect to be able to join the Tidewater Crabs at their meet in two weeks.

Left to do:
- Install new brake caliper
- shorten my accelerator cable. It appears to be too long and as such, does not allow the secondary carb valves to open. This came from a long time GMCer so who am I to question! By removing the slack in the cable, we were able to get the carb to respond correctly.
- The switch located above the accelerator pedal that signals the transmission to downshift is not closing correctly. I need to clean and fix it, or replace the switch.

What I would like to accomlish, but may not have the time.
- I purchased a PD9260 and hoped to replace the buzz box. Unfortunately, my converter box contains my 12v fuse panel and is a single unit. To install the PD9260 I will need to install a seperate 12v panel and reroute the wires. Does anyone have suggestions for a good 12v fuse box?
- I believe I have a solution to my water tank problem and would like to get it done. If my idea works, I will let you all know.

Pictures..just because I am happy to see it clean and raring to go!

http://i.imgur.com/gZGAGie.jpg http://i.imgur.com/gZGAGie.jpg
http://i.imgur.com/Hxre801.jpg http://i.imgur.com/Hxre801.jpg

Thanks again to you all!


Robert Peesel 1976 Royale 26' Side Dry Bath Conifer, Colorado
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] SUPER Brake Booster Aux Vacuum Pump
Next Topic: Gravity bleeding...explain like I am five why it works....
Goto Forum:
  


Current Time: Mon Sep 30 00:25:36 CDT 2024

Total time taken to generate the page: 0.29066 seconds