Replacing the buzz box [message #257244] |
Wed, 30 July 2014 20:58 |
thorndike
Messages: 406 Registered: January 2011 Location: Conifer, Colorado
Karma:
|
Senior Member |
|
|
After learning about the drawbacks to the original buzz box, I will be replacing it shortly and I have a couple questions.
First, I know a lot a folks are using the Progressive Dynamics box and seem to be happy with it. My question is, how to chose which box should I chose? I am not sure what "Peak Inrush Current" and "Input Current at Rated Power" means and how the difference specs will affect my usage. I know some have the PD9260 and others have the PD9245.
I would also like to know how I can verify that the electrical systems are currently charging the batteries thus proving that the current wiring is correct before making this major change.
Bob
I apologize for my ignorance!
Robert Peesel
1976 Royale 26'
Side Dry Bath
Conifer, Colorado
[Updated on: Wed, 30 July 2014 21:53] Report message to a moderator
|
|
|