GMCforum: GMCnet » Measurement needed

Home » Public Forums » GMCnet » Measurement needed

Show: Today's Messages :: Polls :: Message Navigator

Measurement needed [message #255797]

Fri, 18 July 2014 13:44

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma:

Senior Member

Would anyone have the dimensions for the CV flange to flange width of our final drives? I'd like to get the dimensions pretty close, better than I can manage from under the coach. If someone had one on a bench that would be great. I'm trying to work out the axle lengths needed on the diesel swap and which IFS to use. Any help would certainly be appreciated.
Thanks again,Hal

"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane." 1977 Royale 101348, 1977 Royale 101586, Diesel powered, 1974 Eagle Bus 45',w/slideout, Rio Rancho, NM

Report message to a moderator

[Message index]

		Measurement needed By: Hal StClair on Fri, 18 July 2014 13:44
		Re: Measurement needed By: bwevers on Fri, 18 July 2014 18:54
		Re: Measurement needed By: Hal StClair on Fri, 18 July 2014 19:45
		Re: Measurement needed By: lotsofspareparts on Fri, 18 July 2014 19:51
		Re: Measurement needed By: Hal StClair on Fri, 18 July 2014 20:01
		Re: Measurement needed By: lotsofspareparts on Fri, 18 July 2014 20:17
		Re: [GMCnet] Measurement needed By: James Hupy on Fri, 18 July 2014 20:14
		Re: Measurement needed By: A Hamilto on Fri, 18 July 2014 20:09
		Re: Measurement needed By: midlf on Sat, 19 July 2014 15:55
		Re: Measurement needed By: Hal StClair on Sat, 19 July 2014 16:22
		Re: Measurement needed By: midlf on Sat, 19 July 2014 17:22
		Re: Measurement needed By: midlf on Sat, 19 July 2014 21:38
		Re: Measurement needed By: Hal StClair on Sat, 19 July 2014 22:30
		Re: Measurement needed By: midlf on Sun, 20 July 2014 04:51

Previous Topic:	Help Identifying Awning
Next Topic:	Re: [GMCnet] Intakes and Turkey Pans

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 11:36:40 CDT 2024

Total time taken to generate the page: 0.01579 seconds