GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Heater/AC control cable (Heater/AC control cable plastic end broken)
Heater/AC control cable [message #253512] Sat, 28 June 2014 10:19 Go to previous message
glenn2726 is currently offline  glenn2726   United States
Messages: 234
Registered: June 2014
Location: Topeka, Kansas
Karma:
Senior Member
Hi all, while working to replace stereo I noticed the dash controls for the hot/cold heater/AC control cable had the end which is plastic broken off. It is the cable behind the dash control panel that connects to the arm that comes through the dash. The cable is probably frozen up from sitting so that is why the plastic end is broken. Is there a replacement for the plastic end of the cable or can you find one or replace the whole cable? I think I can free up the cable by using some motorcycle cable lubricant but just checking before I put the stereo in and don't want to have to pull it back out once done....Thanks, Glenn

Glenn W Topeka, KS 1974 GMC 26 ft. Color:Camel Interior:Canyon Land Side Bath, Rear Sitting Area
 
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Test to List...
Next Topic: 2 Piece Radiator Shroud
Goto Forum:
  


Current Time: Wed Nov 20 01:37:57 CST 2024

Total time taken to generate the page: 0.00966 seconds