GMCforum: GMCnet » Pre-Heater Hose

Home » Public Forums » GMCnet » Pre-Heater Hose (aluminum vs aluminum & fiberglass)

Show: Today's Messages :: Polls :: Message Navigator

Pre-Heater Hose [message #251966]

Wed, 11 June 2014 13:51

mickey szilagyi

Messages: 273
Registered: January 2013

Karma:

Senior Member

Our 403 didn't have a pre-heater hose running from the manifold to the air filter when we got our 77 Kingsley and we figure it would be good to put one on. Called around and there are two that we can get. One is aluminum, 2 inch diameter, 18 inches long for about $8. Then there is another one with the same dimensions only aluminum and fiberglass for about $25. We have no idea if the aluminum one is good enough or if there's an advantange of having the one with fiberglass. Anyone kind enough to offer an opinion is greatly appreciated.

Hope this question isn't like the which-is-the-best-engine-oil-to-use question.

Thanks!

Mickey 1977 Kingsley, 403, Lansing, MI

Report message to a moderator

[Message index]

		Pre-Heater Hose By: mickey szilagyi on Wed, 11 June 2014 13:51
		Re: [GMCnet] Pre-Heater Hose By: emerystora on Wed, 11 June 2014 13:55
		Re: Pre-Heater Hose By: mickey szilagyi on Wed, 11 June 2014 14:13
		Re: Pre-Heater Hose By: Otterwan on Wed, 11 June 2014 14:26
		Re: Pre-Heater Hose By: Bob de Kruyff on Thu, 12 June 2014 16:18
		Re: Pre-Heater Hose By: Jon payne on Thu, 12 June 2014 11:27
		Re: Pre-Heater Hose By: Gary Carlton on Thu, 12 June 2014 16:11

Previous Topic:	Alternator Bracket
Next Topic:	[GMCnet] Norcold 8663

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 13 23:27:29 CDT 2024

Total time taken to generate the page: 0.06987 seconds