GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Electric Choke Conversion for Carb.
Electric Choke Conversion for Carb. [message #246762] Tue, 08 April 2014 10:21 Go to previous message
Bruce Hart is currently offline  Bruce Hart   United States
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma:
Senior Member
Switching over to an electric choke and found this info from Qudrajetparts.com I emailed them with the following question.

I am wanting to change over my original choke assembly for a Quadrajet CARB#7043254 (1976 GMC motor home). I have the temperature sensing one on now (OE) and would like to install the electric choke for this model. Will part # Q1211A retrofit in the existing choke housing or would I need to get the Q1221 for a big block chevy.

Bruce,
If your thermostat is located on your intake manifold you will need to use Q1221 (if your vehicle is on application list)

If you currently have a black round hot air thermostat mounted on side of carb, all you need is Q1211A.
Greg

http://quadrajetparts.com/advanced_search_result.php?keywords=q1211a&search_in_description=1&x=0&y=0

http://quadrajetparts.com/rochester-quadrajet-parts-quadrajet-chokes-electric-choke-thermostat-kit-flat-terminal-p-416.html



Replacement assembly with "Flat" shaped terminal. The flat terminal allows use of standard spade type electrical connection. Electric Choke Thermostat fits Rochester Quadrajet, Twojet and Dualjet carburetors.
When 12v power is supplied to the choke and the element heats up, the bi-metal coil tightens up. When the coil cools down, the coil un-winds.
Includes 3 retainers and 3 screws.
Note:
Screws included with this kit are Q4215, over sized, self tapping screws.
Hot-Air Choke to Electric Choke Conversion:
This electric choke thermostat can be used to replace original hot-air thermostat, just run 12v. to the thermostat and remove original hot-air choke thermostat gasket.
Thermostat diameter: 2-1/4"
Note: Pigtail connector # Q1331 or OEM connector can be used for a factory look, but the connectors locking/unlocking mechanism will be lost.



Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] Why a carrier in the navy never appealed to me- fuel tank progress
Next Topic: [GMCnet] Another Tire Experience
Goto Forum:
  


Current Time: Mon Sep 30 17:18:25 CDT 2024

Total time taken to generate the page: 0.00691 seconds