Body/Frame Pads - Insulators [message #246353] |
Fri, 04 April 2014 06:32 |
mickey szilagyi
Messages: 273 Registered: January 2013
Karma:
|
Senior Member |
|
|
We're planning on replacing and more importantly putting in missing frame/body pads this weekend and we had a closer look at the following diagram:
http://www.gmcmhphotos.com/photos/showphoto.php?photo=14837
It looks like pads go where the cross frames meet the side frames. In the diagram the 4th set of pads from the rear of the coach look to be double. Why are two shown in the diagram? Are they doubled up one on top of each other or side by side?
Any help on this is greatly appreciated. And if there is a better diagram, illustration or images of the pads proper location we'd appreciate having them. We already have the pads and are planning to glue them in place. We've also read what we could find on how to jack up the body from the frame. Any special tricks or hints are welcome as well.
Thanks for your help,
Mickey
1977 Kingsley, 403, Lansing, MI
|
|
|