GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Frame mounted Battery box
Frame mounted Battery box [message #245495] Fri, 28 March 2014 09:22 Go to previous message
burtco99 is currently offline  burtco99   Canada
Messages: 31
Registered: September 2007
Location: Montreal
Karma:
Member
Has anyone tried using a frame mounted battery box on their coach as a means of adding or relocating the batteries?

I'm thinking that the boxes used on the diesel Ford E-350 cube vans might make a suitable candidate, but I do not know if there is room on the outside of the rail to mount them with creating an eyesore or safety issue. I can't check on my coach because the frame is out from under it.

These are the boxes I'm thinking of:
http://www.gmcmhphotos.com/photos/electrical/p54069-econoline-diesel-battery-box.html

And I have looked at frame photos and can't find anything that gives enough detail to say yeah or neah.
This is the best photo I found of the outside frame area:
http://www.gmcmhphotos.com/photos/showfull.php?photo=25709

I think that the box would likely hang a bit below the frame, but without dimensions of the box, it is hard to know how much below. Due to the width of the box, it may also conflict with the lower body panel, but again hard to tell as I have no dimensions to work with.

I also realize that servicing a battery mounted in one of these will be more difficult, as it will likely require lowering the entire box.

Thoughts, comments?



Les Burt
Montreal
1975 Eleganza 26ft
A work in Progress
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] 76 Eleganza For Sale
Next Topic: Ken Thoma Bearing Tool
Goto Forum:
  


Current Time: Thu Oct 03 04:07:04 CDT 2024

Total time taken to generate the page: 0.00717 seconds