GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » [GMCnet] Photo's that show area removed for 16" steel wheels
[GMCnet] Photo's that show area removed for 16" steel wheels [message #244011] Mon, 17 March 2014 21:01 Go to previous message
BobDunahugh is currently offline  BobDunahugh   United States
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma:
Senior Member

Below is the E-mail I just sent to Rob Mueller with photo's. Someone e-mailed me to say that they would post the photo's for me. If that person could get back to me. That would be great. If anyone wants the photo's E-mailed. Let me know.Bob Dunahugh
From: yenko108@hotmail.com
To: robmueller@iinet.net.au
Subject: Photo's that show area removed
Date: Mon, 17 Mar 2014 20:39:43 -0500





These are shots of the OEM caliper just before I removed it to put the 80 mm caliper on. I'm putting 6 wheel disc on at this time. As you can see at the top. Above the caliper pin. Is the area that I removed some material. That area was shaped to match the contour of the main body of the OEM caliper. The same shaping was done at the lower caliper pin.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Stud Cleaning Tool
Next Topic: WOW, it's almost a miracle....
Goto Forum:
  


Current Time: Wed Oct 02 19:24:03 CDT 2024

Total time taken to generate the page: 0.00715 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software