| Onan carb float [message #243775] |
Sun, 16 March 2014 14:18  |
gbarrow2
Messages: 765
Registered: February 2004
Location: Lake Almanor, Ca./ Red Bl...
Karma:
|
Senior Member |
|
|
What's the trick to getting the float bowl re-installed without binding the float?
With the bowl off and the needle and float in place I can blow through the inlet tube and the float and needle move freely.
When I screw the bowl in place the needle seals in the seat and I cant blow through inlet.
I've had this apart in the past and it went back together with no problem.
Few days ago Onan was running for a while and died. Got spark, fuel in the tank, and the pump is working. Wouldn't re-start.
After trying to start today with no success- removed float bowl and it was bone dry. No fuel getting past the inlet valve.
Suggestions please.
Gene Barrow
Lake Almanor, Ca.
1976 Palm Beach
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
