GMCforum: GMCnet » Headliner FRP width

Home » Public Forums » GMCnet » Headliner FRP width

Show: Today's Messages :: Polls :: Message Navigator

Headliner FRP width [message #242896]

Mon, 10 March 2014 08:53

dfolse75gmc

Messages: 7
Registered: November 2013
Location: Shreveport, Louisiana

Karma:

Junior Member

I am in the process of replacing my headliner. I have read to use the original cardboard as a pattern for holes etc, OK. During my search, I read where the cardboard can shrink. Do any of you know what width I should cut the FRP panels so that it will "pop" into place on the aluminum extrusion? Thanks, Darrel

Report message to a moderator

[Message index]

		Headliner FRP width By: dfolse75gmc on Mon, 10 March 2014 08:53
		Re: Headliner FRP width By: armandminnie on Mon, 10 March 2014 09:07
		Re: [GMCnet] Headliner FRP width By: Len Novak on Mon, 10 March 2014 09:45
		Re: Headliner FRP width By: appie on Mon, 10 March 2014 09:08
		Re: Headliner FRP width By: dfolse75gmc on Mon, 10 March 2014 09:31
		Re: Headliner FRP width By: dfolse75gmc on Mon, 10 March 2014 09:56
		Re: Headliner FRP width By: appie on Mon, 10 March 2014 10:56
		Re: [GMCnet] Headliner FRP width By: ljdavick on Tue, 11 March 2014 02:05
		Re: Headliner FRP width By: dfolse75gmc on Tue, 11 March 2014 22:19
		Re: [GMCnet] Headliner FRP width By: ljdavick on Wed, 12 March 2014 01:29
		Re: Headliner FRP width By: Adrien G. on Tue, 11 March 2014 23:35

Previous Topic:	Fuel Vent Mod
Next Topic:	[GMCnet] Suzuki Samurai Repower

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Oct 04 06:33:11 CDT 2024

Total time taken to generate the page: 0.01288 seconds