GMCforum: GMCnet » Macerator Wiring

Home » Public Forums » GMCnet » Macerator Wiring

Show: Today's Messages :: Polls :: Message Navigator

Macerator Wiring [message #242457]

Thu, 06 March 2014 08:34

mickey szilagyi

Messages: 273
Registered: January 2013

Karma:

Senior Member

Getting ready to install a new macerator and the instructions call for #142.5 size for 10 to 25 feet. I see that's a marine size. Is that the same as 14 gage braided wire, like automotive wire?

We're also looking to use a 12V 20A toggle switch with a flip cover to prevent accidentally turning it on along with a push button reset 20 amp breaker.

It might get above freezing this weekend, WOW!

Thanks again as always.

Mickey 1977 Kingsley, 403, Lansing, MI

Report message to a moderator

[Message index]

		Macerator Wiring By: mickey szilagyi on Thu, 06 March 2014 08:34
		Re: [GMCnet] Macerator Wiring By: emerystora on Thu, 06 March 2014 08:40
		Re: Macerator Wiring By: mickey szilagyi on Thu, 06 March 2014 10:21
		Re: Macerator Wiring By: WildBill on Thu, 06 March 2014 11:51
		Re: Macerator Wiring By: mickey szilagyi on Thu, 06 March 2014 12:30
		Re: [GMCnet] Macerator Wiring By: jhbridges on Thu, 06 March 2014 13:15
		Re: Macerator Wiring By: Carl S. on Thu, 06 March 2014 16:04
		Re: Macerator Wiring By: Matt Colie on Thu, 06 March 2014 18:40
		Re: Macerator Wiring By: WildBill on Thu, 06 March 2014 16:56
		Re: Macerator Wiring By: Ken Burton on Thu, 06 March 2014 19:51

Previous Topic:	Oven knobs
Next Topic:	[GMCnet] I gave myself the wrong diagnosis. But that's OK

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 06 21:19:08 CDT 2024

Total time taken to generate the page: 0.00964 seconds