GMCforum: GMCnet » [GMCnet] Original front wheel bearing assembles

Home » Public Forums » GMCnet » [GMCnet] Original front wheel bearing assembles

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Original front wheel bearing assembles [message #242116]

Mon, 03 March 2014 00:18

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

The main problem is that the knuckle bore gets oversized over time. The 78 GMC that I put the 1 ton assembly in last year also had both the hub worn a little over .001. I got reworked knuckle castings from Dave L to put in my GMC. My question is, Are the hubs as prone to wear as the knuckle castings. I haven't taken mine apart yet. So am I going to have to rework my hubs also?
Thanks Bob Dunahugh Member GMCMI
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Original front wheel bearing assembles By: BobDunahugh on Mon, 03 March 2014 00:18
		Re: [GMCnet] Original front wheel bearing assembles By: lgarland1 on Mon, 03 March 2014 01:09
		Re: [GMCnet] Original front wheel bearing assemblies By: BobDunahugh on Mon, 03 March 2014 09:01
		Re: [GMCnet] Original front wheel bearing assembles By: Matt Colie on Mon, 03 March 2014 09:29
		Re: [GMCnet] Original front wheel bearing assembles By: Carl S. on Mon, 03 March 2014 12:26

Previous Topic:	olga is ill-part 2
Next Topic:	Fuse Help

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 15 21:10:42 CST 2024

Total time taken to generate the page: 0.01064 seconds