GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Necessity IS the mother of invention (One (old and weak) man steering gear box installation.)
Necessity IS the mother of invention [message #240562] Thu, 20 February 2014 09:03 Go to previous message
gbarrow2 is currently offline  gbarrow2   United States
Messages: 765
Registered: February 2004
Location: Lake Almanor, Ca./ Red Bl...
Karma:
Senior Member
Not strong enough to lift and hold the steering gear box in place with one arm while trying to get a bolt started with the other hand but didn't want to wait till I could get help.

Used an adjustable tie down strap- one end hooked through the u-joint yoke of the lower steering shaft and the other hooked to the power steering motor support bracket. Easily hoisted into position from above.

So now the question is: How do I get all the air out of the system?
Replaced steering gear box and pump- Filled with ~3 pints of fluid- cycled pump through MANY lock to lock turns while on jack stands- turned on the OEM wiper motor.

Drove a couple of miles around the block making turns in both directions.

Reservoir is full but pump is noisy. Low power assist at low rpm.

Is it just a matter of matter of driving and turning more?

Thanks



Gene Barrow
Lake Almanor, Ca.
1976 Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Mystery Awning
Next Topic: [GMCnet] Harbor Freight Discount Coupons
Goto Forum:
  


Current Time: Sat Oct 05 03:20:37 CDT 2024

Total time taken to generate the page: 0.00860 seconds