GMCforum: GMCnet » Phasing of CV joints?

Home » Public Forums » GMCnet » Phasing of CV joints?

Show: Today's Messages :: Polls :: Message Navigator

Phasing of CV joints? [message #230798]

Fri, 22 November 2013 15:43

quadracerx1

Messages: 207
Registered: April 2013
Location: Puyallup, Washington

Karma:

Senior Member

Got the carb rebuild done... Runs again, but part of the mechanical rebuild of my coach was new CV Boots, turning of the rotors, replacing the calipers and pads... When we first moved it we heard a loud clunk twice? We moved it about 100 feet total... So now I'm nervous!! I don't know if there is something we could have done wrong with regard to the "CV joint phasing I kind of remember reading about?

Any Ideas?

Thanks,

Steve

75 26' GMC Glenbrook Puyallup, Washington

Report message to a moderator

[Message index]

		Phasing of CV joints? By: quadracerx1 on Fri, 22 November 2013 15:43
		Re: Phasing of CV joints? By: Bob de Kruyff on Fri, 22 November 2013 18:25
		Re: Phasing of CV joints? By: Ken Burton on Sat, 23 November 2013 07:21

Previous Topic:	[GMCnet] Found another
Next Topic:	Re: [GMCnet] Bud Bronson Dies

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 09 21:22:48 CDT 2024

Total time taken to generate the page: 0.01844 seconds