[GMCnet] Flushing Radiator [message #225811] |
Wed, 16 October 2013 01:17 |
BobDunahugh
Messages: 2465 Registered: October 2010 Location: Cedar Rapids, IA
Karma:
|
Senior Member |
|
|
I like to flush mine every 2 years. One way that I use is I pull the lower hose off the water pump, and let it hang down. I don't pull it off of the radiator, as it's more apt to be damaged. Slip it back on, and fill with water. Start the engine,and let it run for about 3 min with heater on. I continue to repeat until the water come out clean. I like to pull the block drains during at least one of the cycles. Then put 3 gals of antifreeze in after the last drain. Then top off with water. Make sure you fill your overflow tank to the proper level with 50/50.
Bob Dunahugh78 Royale4 Yenkos
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|