GMCforum: GMCnet » [GMCnet] Surfacing the heads

Home » Public Forums » GMCnet » [GMCnet] Surfacing the heads

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Surfacing the heads [message #225434]

Sun, 13 October 2013 11:54

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

You don't have to do anything to the intake when surfacing the heads. As your only taking off a few thousands off the heads. If they have to take off a lot. Then replacing the heads should be considered. And the block deck should also should be examined
Bob Dunahugh78 403 Royale.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

[GMCnet] Surfacing the heads

By: BobDunahugh on Sun, 13 October 2013 11:54

Previous Topic:	[GMCnet] Water heater circuit board
Next Topic:	Re: [GMCnet] Advice needed!!!! Newbie just bought my first GMC RV

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 19 18:09:31 CDT 2024

Total time taken to generate the page: 0.00616 seconds