[GMCnet] Also need help with C C [message #223085] |
Thu, 19 September 2013 00:50 |
|
hnielsen2
Messages: 1434 Registered: February 2004 Location: Alpine CA
Karma:
|
Senior Member |
|
|
Boy
I hope someone can help me with ours at Coos Bay.
We installed ours over five years ago.
I need someone with a different set of eyes to look it over.
See you at Coos Bay.
We are pulling out of Alpine on the 26th taking the slow route picking up US 101 north of L A stoping at Buellton the first day.
Then who knows?
All are welcome to join us.
Thank You
Hnielsen2@cox.net
Cell 619-445-9777
Howard and Susie
All is well with my Lord
On Sep 18, 2013, at 20:11, Carl Stouffer <carljr3b@yahoo.com> wrote:
>
>
> Matt Colie wrote on Wed, 18 September 2013 17:26
>> Mary is getting a little annoyed.
>> The cruise doesn't work. The light comes on but it doesn't hold.
>> I've check the vacuum lines and the ball chain and everything seems to be as it should. I am hoping to have time to tear it down at Branson, but that still gives her a day of "Driving"
>>
>> This is made worse because I now have all the parts but I still haven't had time to install the Dana Speedostat (c.1973) that I have in a special box in my barn.
>>
>> Matt
>
>
> Matt,
>
> A few years ago, when I was having intermittent problems with my cruise control, Ken B suggested I move the ground from the body to the engine. It helped. I eventually ended up replacing the transducer and the turn signal stalk switch and now it works perfectly.
> --
> Carl S.
> '75 ex Palm Beach
> Tucson, AZ.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
All is well with my Lord
|
|
|