GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMC Swap Meet » speedo printed circuit/connector
speedo printed circuit/connector [message #221933] Tue, 10 September 2013 11:37 Go to previous message
scheibejn is currently offline  scheibejn   United States
Messages: 35
Registered: March 2013
Location: Stillwater, MN
Karma:
Member
I’m looking for the speedometer printed circuit piece with male contact pins and the female connector that goes with these contacts. The parts book has them listed as:
6294647 CONNECTOR p/c inst. Panel harness. gauge cluster/speedometer
6493204 CIRCUIT ASSY (used w/8989366) SOA
The one I have on the vehicle had no connector and only two surviving male contact pins. I wasted lots of time by replacing the necessary pins with tiny bronze bolts/washers/lock washers/epoxy and ring connectors. It worked just fine until the bolts shorted out on the flexible air vent hose that I replaced with aluminum.

My vehicle is 1977 Kingsley.
GMC PARTS STICKER
Printed in U.S.A. 6-0975 110376 CORRECTION S19119 342933
SERVICE PARTS IDENTIFICATION
V.I.N. TZE167V100796 W/BASE 160 SE NONE

Wish to purchase these parts
If you have them let me know cost+shipping. If not, but know who might have them, please let me know.
James N Scheibe
6351 St. Croix Trail North #230
Oak Park Heights, MN 55082
scheibejn@gmail.com
651 430-2081 home
651 897-2702 cell


Jim Scheibe 1977 Kingsley 26' GMC PD(parlor diesel)4106, 93 Volvo, 96 Volvo, Oak Park Heights MN 55082 On the gorgeous St. Croix River lookin' at WI shore
 
Read Message
Read Message
Read Message
Previous Topic: Cadillac 500 fuel injection system (One Still Available)
Next Topic: Toad for sale
Goto Forum:
  


Current Time: Sun Oct 06 17:51:25 CDT 2024

Total time taken to generate the page: 0.00863 seconds