GMCforum: GMCnet » Update on my custom grill

Home » Public Forums » GMCnet » Update on my custom grill (and some other stuff)

Show: Today's Messages :: Polls :: Message Navigator

Update on my custom grill [message #221845]

Mon, 09 September 2013 20:08

kerry pinkerton

Messages: 2565
Registered: July 2012
Location: Harvest, Al

Karma:

Senior Member

This spring, I made this grill out of aluminum angle and some stainless woven mesh.

The whole photo saga is at:

http://www.gmcmhphotos.com/photos/g6328-aluminum-grill.html

http://www.gmcmhphotos.com/photos/data/6328/z_0101.jpg

http://www.gmcmhphotos.com/photos/data/6328/z_0101.jpg

If you look close you can see the droop in the center. This is because the grill is V'ed to the center but also angled back at the bottom.

Did some repairs to straighten the grill. Kind of non trivial because the stainless can't be shaped and had to be pie cut to get it to go into line. That's why there is a vertical bar now. At the same time, painted the headlight buckets body color. WOW, what a difference that made.

http://www.gmcmhphotos.com/photos/data/6328/m_0014.jpg

http://www.gmcmhphotos.com/photos/data/6328/m_0014.jpg

http://www.gmcmhphotos.com/photos/data/6328/m_0024.jpg

Also made a little aluminum channel to hold the upper radiator hose off the belts. The ends are flared to keep them from cutting the hose. Mine was only an inch from the belts and that was too close for comfort for me. Another KISS thing. Laughing

http://www.gmcmhphotos.com/photos/data/6256/m_0033.jpg

Kerry Pinkerton - North Alabama Had 5 over the years. Currently have a '06 Fleetwood Discovery 39L

Report message to a moderator

[Message index]

Update on my custom grill

By: kerry pinkerton on Mon, 09 September 2013 20:08

Previous Topic:	[GMCnet] Looking for cast iron manifolds and HEI air cleaner
Next Topic:	[GMCnet] Coos Bay

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Apr 02 21:38:10 CDT 2025

Total time taken to generate the page: 0.09227 seconds