| [GMCnet] Holding tank sensors. Black/Gray [message #221843] |
Mon, 09 September 2013 19:40 |
BobDunahugh
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma:
|
Senior Member |
|
|
I received an e-mail on some really nice ones for both tanks for about $64. Good price I thought. Ours need 10 contacts. 78 Royale. Not 8 for both. Emery suggested that I pick up some well nuts. ( Thanks for the help Emery. ) And put stainless screws, and washers in the well nuts. That cost at the hardware store was $1.82 each for the 10. ( If this doesn't work. At least I won't have much money in my lost cause. ) I used a sharpie on the tank to keep track of the colored wire locations. It was simple to pull the old ones out, with out doing any damage to the tanks. Yes, the tanks were empty. First thing to check. RIGHT. I'll put the new ones in shortly. Then I'll find out that I have a wiring issue. If you see a HELP single out. You'll know.
Bob Dunahugh GMCMI Member
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
